Solder Wire 2mm for Brass, Zinc, Copper
A 2.0mm (14 swg) lead free solder wire with an acid core flux for soldering to most metals.
- From Brass, bronze, cadmium plating, copper, galvanised wire, iron and lead
- Mild steel, nickel and nickel plating, silver, spring steel, tin plate, zinc and zinc plating
- High active flux that promotes excellent wetting
Standard DeliveryUsual shipping within 2-5 days
Next DayService available. Cut-off by 12.30pm
A 500g reel of a 2.0mm gauge solder wire from Walton Metals incorporating an acid flux core for soldering a wide range of metals used in metal fabrication. The Activ 8 is a Fast Flowing 3% flux core in a High Purity 99C Tin Copper Lead Free alloy (0.45 - 0.9% Copper with balance of Tin). The Activ 8 flux promotes wetting on metals such as:
Nickel and nickel plating
Zinc and zinc plating
Note: This product is not to be used on electronic assemblies. For Stainless Steel soldering a 96S product should be used.
Flux residues under dry conditions would be non-corrosive. If the work is exposed to humidity, which is normal, the residues will over time become mildly corrosive therefore a simple removal by warm water is recommended.
Flux residues are considerably less corrosive than using a seperate liquid flux.
|Brand||Warton Metals solder wire|
|Collect in Store||No|
Solder alloy: Tin Copper (0.4 - 0.95% Cu / Sn Bal)
|MPN||Activ 8 99C 14swg|