PCB Rack with 21 slots

MPN: FPV91600100
A 21 slot PCB rack holding boards up to 535 x 400mm. Can be used horizontally and vertically.
- Sturdy construction
- Add centre panels if required
- Racks large PCBs
Note: Currently not available for delivery to Europe Zone 3, Europe Zone 4, Europe Zone 5, Europe Zone 6, Guernsey, Jersey, Australia, Brazil, Canada, Hong Kong, Malaysia, Mexico, New Zealand & USA and India.
Delivery Options
Product Description
The Fami FPV 9160 01 00 is a two sided slotted frame comprising of the Fami end panels FPV 6452 00 07 with two aluminium guide rails FPV 9160 00 00. These rails are 552mm long so allowing very long PCBs to be fitted in to the rack. The aluminium rails are re-inforced for extra rigidity. The slot profiles in the end panels are 2.5mm wide and 3.0mm deep and on a 15.3 pitch. This rack has 21 PCB slots and is an overall size of 552 x 350 x 190mm. The largest PCB this accommodates is 535 x 400mm. Supplied with a set of fasteners for easy assembly.
Made from injection moulded conductive co-polymer polypropylene
Suitable for temperatures up to 100°C
Integral back stops
Assembled racks fit in to standard euro containers
ESD conductive material value of 1 x 10(4) M ohms
Specification
End panel
Fami part no: F PV 6452 00 07
Overall dimensions: 350 x 30 x 190mm
Slot width: 2.5mm
Slot depth: 3.0mm
Slot pitch: 15.3mm
Material: Injection moulded conductive co-polymer polypropylene
ESD conductive material value of 1 x 10(4) M ohms
Guide rails
Material: Aluminium
Fami part no: F PV 9160 00 00
Length: 552mm
Width: 53mm
ESD conductive material value of 1 x 10(4) M ohms
Fasteners
Fami part no: F PV 9010 00 07
Total parts for the F PV 9160 01 00
End panel: 2 off
Guide rail: 2 off
Fasteners: 1 set