ESD Floor Paint Green

MPN: A40 Green
An ESD floor paint in Green for static controlled areas. Supplied in 5 litre tins.
Note: Currently not available for delivery to Europe Zone 3, Europe Zone 4, Europe Zone 5 and Australia, Brazil, Canada, Hong Kong, Malaysia, Mexico, New Zealand & USA.
Delivery Options
Product Description
The A40 Acrylic ESD Floor Paint is a single pack water based product that can be safely applied by personnel without specialist knowledge of flooring sytems. What is important though is the surface preparation of the existing floor so please do read our 'Application of A40 Acrylic ESD Floor Paint' pdf above. Available in a 5 litre tin with a coverage of approximately 10 m² per litre. (Two thin coats are recommended)
A single pack quick application floor paint
Green colour (RAL 6002)
Copper grounding strips also supplied
Supplied in a 5 litre tin
Specification
Physical Properties:
Typical thickness: 40 microns per coat (2 thin coats recommended)
Drying@ 20°C: Touch Dry 2 Hours
Re-Coat at 8 Hours
Full Cure 3 Days
Pot Life: 12 months
VOC Content: 60.5g/ litre
Coverage: 10m2 / litre per coat (2 thin coats recommended)
Mix ratio: Ready Mixed
Thinner: Not recommended
Colour: Green (RAL 6002)
Pack size: 5 litres
Limitations:
Do not apply at temperatures below 10°C. Curing times dependant on temperature, humidity and ventilation.
Electrical properties:
Surface resistance: 10(5) - 10(8) ohms/sq
Resistance to Ground: 10(5) - 10(8) ohms
Conforms to IEC 61340-5-1 / 2
Chareg Decay: Conforms to MILB81705C