Login / Register
£ GBP
€ EUR
$ USD
Contact Us
Grid
List
A lead free solder paste in a syringe for easy hand or dispensing equipment application.
- A Tin Silver Copper SAC305 alloy
- Available in Type 3 and Type 4 solder powders
- No clean flux
Need a solder paste using tin lead? Qualitek 619D solder paste is available in 10cc and 30cc syringes.
- Available with or without a plunger
- In a Type 3 or a Type 4 powder size
- No cleaning required
THIS PRODUCT CONTAINS LEAD (Pb). RESTRICTED TO PROFESSIONAL USERS ONLY
Tin Bismuth solder paste alloy for heat sensitive components and for low temperature soldering.
A Halogen Free Lead Free solder paste for 'Greener Electronics'. Available in 250g and 500g jars.
A Qualitek SAC305 no clean solder paste exhibiting excellent soldering properties. Available in 250g and 500g jars.
An excellent performing lead free solder paste from Qualitek. Available in 250g and 500g jars in grades type 3 and type 4.
A lead free paste that produces excellent bright solder joints after cleaning.
A Qualitek tin lead solder paste that is a tried and tested product giving excellent solder joints. Available in 250g and 500g jars in type 3 and type 4 powder.
- Excellent wetting on all PCB surfaces
- Long stencil and shelf life
- Leaves minimum flux residues
THIS PRODUCT CONTAINS LEAD (Pb). RESTRICTED TO PROFESSIONAL USERS ONLY
A water soluble solder paste flux with in a Tin Lead Silver alloy powder. Excellent finish after cleaning.
THIS PRODUCT CONTAINS LEAD (Pb). RESTRICTED TO PROFESSIONAL USERS ONLY
Manufactured by Almit Japan for high-reliability electronics production. A SAC305 solder alloy and a class Type 4 powder size.
- Ideal for 0402 and 0201 components
- No clean flux chemistry
- Produces bright shiny solder joints
A quality HMP solder paste for applications requiring a high melting point. With a rosin activated flux.
- Alloy composition of Tin 10% Lead 88% Silver 2%
- Two jar sizes available 250g and 500g
- Rosin activated flux for excellent wetting
THIS PRODUCT CONTAINS LEAD (Pb). RESTRICTED TO PROFESSIONAL USERS ONLY
Solder to most metals including Mild Steel, Brass, Zinc and Copper. Brush on and heat for lead free soldered coating.
- Ideal for lead loading for car body work
- Highly active zinc chloride flux
- Easy clean flux residues
This product is not recommended for printed circuit board soldering.
A rosin based flux with excellent wetting properties giving excellent soldering results.
- Ideal as a pre-dip for wire tinning
- Solder seperately or with solder pot kits
- Gives an excellent solder finish
A low solids no clean flux for PCB Wave Soldering of PTH and SMT component Lead Free soldering.
A low solids no clean flux for wave soldering of PTH and SMT printed circuit boards giving bright, shiny solder joints.
An IPA based thinner solution for controlling the specific gravity of low solid fluxes.
Trying to solder stainless steel and having problems? Use the correct flux, Phosphoric Acid flux, and get excellent solder joints.
- Promotes good wetting of surfaces
- Handy 500ml bottles in stock
- See British Stainless Steel Association link
A highly effective and active acid flux for promoting wetting on many metals.
- Ideal for soldering Copper and Brass
- Also good for Zinc and pre-tinned metals
- Any flux residues easily cleaned
A brush on or dip active acid flux for use on Copper, Brass, Zinc and pre-tinned metals.
- Promotes excellent wetting
- Easy clean flux residues
- Available in 500ml and 1 litre bottles
High-grade lead-free solder pellets ideal for solder pot filling manufactured in a convenient nugget size for small to large solder pots.
- Low SAC alloy (Tin 99% Silver 0.3% Copper 0.7%)
- Melting range: 217 - 227°C
- Manufactured to EN ISO 9453:2006
High quality Tin Lead solder pellets at a great price for solder pot filling.
- Handy size nuggets for solder pot filling
- High purity alloy to BS219
- In stock for next day delivery
THIS PRODUCT CONTAINS LEAD (Pb). RESTRICTED TO PROFESSIONAL USERS ONLY
For applications requiring an LMP (Low Melting Point) solder, this Tin Bismuth alloy ticks the boxes.
- Covenient sized pellets for solder pots
- Melting point of 138°C
- In stock for quick delivery
Tin Lead blowpipe solder rods BS219 Grade K alloy for soldering metals such as copper, stainless steel, brass and zinc.
* Please note: Our blowpipe sticks are produced by hand pouring so the number of sticks may vary. We supply by weight.
THIS PRODUCT CONTAINS LEAD (Pb). RESTRICTED TO PROFESSIONAL USERS ONLY
Blowpipe solder rods in alloy BS219 Grade C for general soldering applications such as sheet metal, wiping and joining of lead pipes and stained glass work.
* Please note: Our blowpipe sticks are produced by hand pouring so the number of sticks may vary. We supply by weight.
THIS PRODUCT CONTAINS LEAD (Pb). RESTRICTED TO PROFESSIONAL USERS ONLY
Excellent alloy for soldering zinc. Also copper pipe solder connections in plumbing systems. Available in various pack sizes.
- No Antimony alloy
- Ideal for zinc sheet soldering
- Use with ZH1 zinc chloride flux for excellent solder joints
* Please note: Our blowpipe sticks are produced by hand pouring so the number of sticks may vary. We supply by weight.
THIS PRODUCT CONTAINS LEAD (Pb). RESTRICTED TO PROFESSIONAL USERS ONLY
Make rework easier with a flux pen. Easy dispense flux on to the solder joint.
A pen style dispenser for the easy application of an active rosin based flux for circuit board rework.
A pen style dispenser for the easy application of a water soluble flux for component and solder joint reworking.
A high tacky flux for reworking and repairing of SMD components. Suitable for lead free and leaded solder rework.
A high tacky rosin based flux for reworking and repairing of SMD components. Suitable for lead free and leaded solder rework.
A water soluble flux gel for reworking and repairing of SMD components and easy residue removal.
A flux gel for use with the Qualitek Tin Bismuth solid core solder wire. Promotes wetting and excellent PCB soldering.
An ultra fine lead free solder wire for fine pitched component soldering. Excellent wetting capability.
- One of the thinnest solder wires available
- Manufactured by Nihon Almit Japan to exacting tolerances
- For fine pitch component soldering
A rosin free lead free solder wire for PCB soldering. Being Colophony Free is very desirable for health and safety reasons.
- A SAC305 (Tin Silver Copper alloy)
- No clean fully synthetic colophony free flux
- Excellent wetting properties
Active flux-cored solder wire from Qualitek manufactured to produce excellent PCB and wire assembly soldering results.
- An active synthetically refined rosin flux
- No clean flux residue
- Available in fine gauges for SMT component soldering
Now available on 250g reels this lead free solder wire for PCB assembly has a great active synthetically refined rosin flux producing excellent solder joints.
A soft solder with a rosin active flux for excellent wetting results. Available in 3 gauges.
An active flux cored 99C lead free solder wire at a great price. Excellent soldering results.
A Qualitek quality lead free no clean solder wire giving excellent soldering performance.
A lead free solder wire with a rosin based flux for extra flux activity and wetting.
Looking for nice bright solder joints with a lead free solder wire? Water soluble flux is the answer.
- An excellent Qualitek solder wire for PCB soldering
- Active flux that once washed leaves a bright solder finish
- Available in 4 different gauges
A Qualitek solder wire with the NC601 flux core with a Tin Lead alloy solder. The NC601 is a colophony free flux and is the product to use in health and safety situations where rosin is not to be used.
- A firm favourite in the Qualitek range of solders
- With a 1.1% rosin free flux core
- Simple residue removal if required
THIS PRODUCT CONTAINS LEAD (Pb). RESTRICTED TO PROFESSIONAL USERS ONLY
A Tin Lead solder wire from Qualitek incorporating the NC600 flux within the core.
- Active flux for a fast wetting performance
- A 60% Tin 40% Lead solder alloy
- No clean solder with easy flux removal if required
THIS PRODUCT CONTAINS LEAD (Pb). RESTRICTED TO PROFESSIONAL USERS ONLY
Compact digital 80W soldering station. For PCB assembly and rework from production to the hobbyist.
- Fast heat up soldering station
- Heating range of 150°C to 480°C
- Power down modes for solder tip life saving
The Quick 203H - Delivering performance and with all the bells and whistles.
- Wide temperature range from 50°C to 600°C
- Tip saving power down mode
- Tips from ultra fine to large
The Quick 203G 150W digital soldering station for temperature-controlled soldering.
- Range of tips available from 3mm to 8mm
- Power down mode for tip wear promotion
- Solid construction
Next generation soldering station from Weller. 90W power station with user-friendly function buttons and LCD display.
The replacement handpiece for the Atten ST80 80W AC230V soldering station.