Login / Register
£ GBP
€ EUR
$ USD
Contact Us
Killstat
Grid
List
A punch, stud and anvil for adding 10mm studs to ESD bench matting for earth grounding cord attachment.
A portable meter for resistance testing within an ESD static controlled area. Supplied with leads, battery and carry pouch.
An ESD testing kit specifically for surface resistivity and resistance to ground testing.
- Test meter supplied with weights and leads
- Supplied in a tough conductive carry case
- Readily available
Test ESD flooring quickly. Enables testing over a large floor area. Supplied in a conductive carry case.
A hand held tester that with a simple press button operation tests ESD work surfaces and Earthing point grounding.
A comfortable excellent priced fully adjustable ESD wrist strap. Available also in an anti-allergy version.
Premium ESD wrist straps for all day comfort. Easily adjustable.
ESD wrist straps manufactured from stainless steel. Adjustable and available in blue.
ESD wrist straps manufactured from stainless steel. Adjustable size with easy link removal. In black.
ESD grounding coiled cords with two 10mm snap connectors for attaching of 10mm bench mat and wrist strap studs. Available in Premium and Standard versions.
ESD grounding coiled cords available in Premium and Standard versions. With a 10mm snap and 4mm banana jack plug connectors.
A 3 metre long straight ESD grounding cord with two 10mm snap connectors. Ideal for ESD floor mats
A 1.8 metre straight ESD grounding cord with a 10mm snap and 4mm banana jack plug connector.
A 3 metre long straight ESD grounding cord fitted with a 10mm snap to an M5 eyelet connector.
A 230mm grounding cord ideal for connecting ESD bench mats together or a connection from a bench mat to an Earth Bonding Point.
A grounding cord with flat moulded 10mm snap giving a low profile ideal for ESD floor mat grounding.
A 1.8 metre straight ESD grounding cord with NO safety resistor. Fitted with a 10mm snap and 4mm jack plug connector.
An ESD straight grounding cord incorporating a 4mm jack plug / crocodile clip at one end and terminated at the other with different connector options. These include a 10mm snap and 2 off banana sockets. Good cord moulded strain relief and also a 1 meg-ohm safety resistor. Manufactured from Non-Conductive PU material covering conductive wiring.
Available in a 15 feet (4.5 metre)...
A premium manufactured heel strap that is easy to fit and to remove. With a 1 M ohm safety resistor fitted.
A premium manufactured ESD heel strap with an easy fasten and release clip.
A premium manufactured ESD heel strap with rubber grounding strips at the back of the shoe as well as the sole.
Designed for a larger shoe size this premium manufactured heel strap is easy to fit and to remove. With a 1 M ohm safety resistor fitted.
Ideal for grounding of footwear across the toe rather than the heel. Velcro fastening for a quick fit.
Disposable ESD heel straps ideal for visitors or for temporary use. A wall mounted dispenser also available.
A 4mm easy lay conductive heavy duty floor matting available in cut lengths. Supplied studded for grounding cord connection.
A 4mm heavy duty conductive rubber floor matting supplied on a 10 metre full roll. (Grounding cord not supplied)
Use Killstat Antistatic Heavy Duty Spray on fabric materials to prevent static.
For use on plastics and hard floors leaving a thin static dissipative layer to prevent static build-up.
To clean and rejuvenate ESD surfaces such as workbenches, soft bench mats, floor mats and vinyl chair coverings.
For periodically removing dirt and grime from an ESD floor helping static dissipation.
Small, light and portable static eliminating ionizer. Adjustable blowing angle and air volume.
A bench top portable static eliminating ionizer. Adjustable blowing angle and air volume. With out-of-balance alarm.
A two fan horizontal ionizer with adjustable blowing angle and air volume. With out-of-balance alarm.
A large ESD waste bin for the safe disposal of waste within a static controlled area.
A small ESD waste bin for the safe disposal of waste within a static controlled area. Antistatic bin liners available.
ESD brushes allow the safe cleaning of ESD sensitive assemblies without generating any harmful static charges.
ESD brush, bristle width 38mm x 5mm for precise cleaning of ESD sensitive components without generating any harmful static charges
ESD toothbrush, bristle width 70mm x 15mm for precise cleaning of ESD sensitive components without generating any harmful static charges
Large ESD toothbrush, bristle width 110mm x 18mm for cleaning ESD sensitive components without generating any harmful static charges
ESD brush with soft natural bristles, width 38mm x 5mm for cleaning of ESD sensitive components.
A small ESD shielding bag for small parts requiring static protection.
75 x 75mm static shielding bags with open top for protection of small parts.
Open top 75 x 125mm static shielding bags for static protection of small board assemblies.
Open top 100 x 155mm static shielding bags.
Opmn top 125 x 205mm static shielding bags.
Open top 155 x 205mm static shielding bags for static protection of components and assembled PCBs.
Open top 205 x 255mm static shielding bags for assembled PCB packing.
Large Metal film layered ESD bags to shield products from electric energy outside and prevent static build up inside.
