The A40 Acrylic ESD Floor Paint is a single pack water based product that can be safely applied by personnel without specialist knowledge of flooring sytems. What is important though is the surface preparation of the existing floor so please do read our 'Application of A40 Acrylic ESD Floor Paint' pdf above. Available in a 5 litre tin with a coverage of approximately 10 m² per litre. (Two thin coats are recommended)

Ready mixed single pack paint

Blue colour (RAL 5002)

Copper grounding strips also supplied

Supplied in a 5 litre tin

More Information

More Information
Brand	Somerset ESD
Customise	No
Collect in Store	No
Specification	Physical Properties: Typical thickness: 40 microns per coat (2 thin coats recommended) Drying@ 20°C: Touch Dry 2 Hours Re-Coat at 8 Hours Full Cure 3 Days Pot Life: 12 months VOC Content: 60.5g/ litre Coverage: 10m2 / litre per coat (2 thin coats recommended) Mix ratio: Ready Mixed Thinner: Not recommended Colour: Blue (RAL 5002) Pack size: 5 litres Limitations: Do not apply at temperatures below 10°C. Curing times dependant on temperature, humidity and ventilation. Electrical properties: Surface resistance: 10(5) - 10(8) ohms/sq Resistance to Ground: 10(5) - 10(8) ohms Conforms to IEC 61340-5-1 / 2 Chareg Decay: Conforms to MILB81705C
MPN	A40 Blue