The FumeCAB 250 is the ideal system for encapsulating fumes from solders, glues, and solvents and then filtering through the BOFA V250 extraction unit to safely remove the fumes.
- The fumecab hood has a fitted LED strip integral light
- The V250 unit has a prefilter and HEPA/Gas filter installed
- The hood has a 400 x 265mm enclosure opening
- The V250 top has a single 75mm port
- Supplied with 1.5 metres of flexible hose.
Heavy
A delivery surcharge may applyThe BOFA FumeCAB 250 enclosure has been designed to meet the new code of practice HSG258 and its' recommendation for the type of LEV system used for certain applications. Fumes generated from hand soldering and solvent use are vented from the rear of FumeCAB250 enclosure and drawn through the filtration system of a single port V250 extraction unit via a 1.5 metre 75mm flexible hose.
FumeCAB 250 Enclosure
Dimensions: (HxWxD) 289 x 400 x 300mm
Cabinet construction: White powder coated mild steel
Recommended Face Velocity: 0.5m/s
V250 extraction unit
Dimensions: (HxWxD) 380 x 260 x 260mm
Cabinet construction: Powder coated mild steel
Airflow / Pressure: 180m(3) / 30mbar
Voltage: 230V
Noise level: < 55dBA (at typical operating speed)
Weight: 10kg
Duct size: 75mm, Duct Run: 5 metres
Pre Filter
Media: Glass fibre paper
Construction: Pad
Efficiency: F7 (96% @ 2 microns)
Combined HEPA* / Gas
(* High-Efficiency Particle Air Filter)
Media: H13 Glass fibre paper
Construction: Maxi Pleat with webbing spacers
Efficiency: H13 (99.997% @ 0.3 microns)
Gas: Impregnated Activated Carbon
Brand | BOFA Fume Extraction |
---|---|
Customise | No |
Collect in Store | No |
MPN | E0842A0006 |