Login / Register
£ GBP
€ EUR
$ USD
Contact Us
Grid
List
Get on top of this fight with bacteria and viruses with Defence+ TB2505 Alcohol Hand Gel. Supplied as a 5 litre container.
- Kills viruses and bacteria quickly and effectively
- Rapid evaporation leaving no residue or odour
- Suitable for catering facilities and anywhere food is prepared
A high purity Isopropanol (IPA) solution for cleaning and thinning of a wide range of products.
- 99.9% IPA purity with 0.1% Deionised water
- Due to high demand maximum of 6 litres per order
- See Technical and Safety data sheets
- SEE FREQUENTLY ASKED QUESTIONS BELOW FOR THIS PRODUCT
Single-use Anti Bacterial wipes for cleaning and disinfecting non-porous surfaces and preventing the spread of viruses and germs.
- Alcohol, Chlorine and fragrance-free wipe
- Suitable for all non-porous surfaces
- 100 wipes per pack
- Cloth size of 185 x 355mm (approx.)
Teknek adhesive pads for use with the Teknek contact rollers. With 50 sheets per pad and A4 size.
- Available as a single pad or multi-pack of 5
- Paper adhesive pad for no charge generation
- Manufactured in the UK
- DEMONSTRATION VIDEO
Ideal low static cleaning product for removing dust and particles from plastic and glass surfaces. Also for printed circuit boards and SMT stencils.
- Use the Teknek tacky pads, 50 sheets per pad
- Conductive handle with dissipative roller
- Manufactured in the UK
- DEMONSTRATION VIDEO
Ideal low static cleaning product for removing dust and particles from plastics and glass. Also ideal for printed circuit boards and SMT stencils.
- Conductive handle with dissipative roller
- Manufactured in the UK
- DEMONSTRATION VIDEO
This microfibre cleaning wipe is ideal for cleaning and leaves a clean sterile surface. Pre-soaked with Isopropanol.
- Produced from 70% IPA 30% DI Water solution
- Lint-free and a Cleanroom grade wipe
- 100 wipes per tub (200 x 200mm)
- Recyclable plastic tub
A handy pack of IPA solvent wipes for cleaning of solder paste from stencils and tools.
- Convenient pack size
- Easy method of dispensing
- Isopropanol (Propan-2-ol) solvent used
A stencil cleaning wipe in a convenient dispensing tub. Lint free so no fibre particles attaching to stencil apertures.
- Pre-soaked with IPA solvent
- 100 wipes per tub
- 70% IPA and 30% Deionised water pre-saturated wipes
A dry lint free cloth supplied in an easy dispensing tub. On a continuous roll with an easy tear perforation.
- Ideal for adding your own solvent for cleaning
- No linted generated
- Great for solder paste removal from stencils and tools
Staticide liquid cleaner for rejuvenating ESD bench matting and ESD worktops. Effective on floor mats and vinyl chair coverings.
- Leaves a streak-free static dissipative surface
- Non-abrasive cleaner removing dirt and grime
- 940ml bottle supplied with a spray nozzle
The Killstat floor cleaning solution is a ready-to-use product that will remove dirt and grime from ESD flooring so helping static dissipation.
- Will cover approximately 100 sq metres
- Use on vinyl or rubber
- No streaks left
Need to clean your circuit boards and remove flux residues? Ideal PCB cleaner for critical assemblies
- Removes all flux residues even stubborn baked-on rosin fluxes
- Spray attachment for intricate and directional application
- Check out the Techspray video https://youtu.be/74JsvVt8KYY
For a thorough, fast drying stencil cleaner in a handy 500ml bottle use Qualitek SK11.
Qualitek Everkleen 1005 for the effective cleaning of printed circuit boards. Use with in-line batch cleaners or ultrasonic baths.
Effectively cleaning electrical contacts, circuit boards and print heads. A 400ml aerosol.