• display as grid Grid
  • display as list List
Page: | 1 | 2 | 3 |

Solvent cleaner for electrical contacts
Solvent cleaner for electrical contacts

Effectively cleaning electrical contacts, circuit boards and print heads. A 400ml aerosol.

£6.95 ex VAT(£8.34 inc VAT)
Techspray Cotton Swabs 80mm Pack of 30Techspray Cotton Swabs 80mm Pack of 30
Techspray Cotton Swabs 80mm Pack of 30

A high precision pointed cotton swab manufactured from a tightly wrapped pre-cleaned cotton giving low particle generation and low extractable contaminants. The rigid head and pointed tip provide precision cleaning for close component areas on PCBs.

Precision pointed cotton tips and paper shaft

Supplied as a pack of 30 swabs

Double...

£5.91 ex VAT(£7.09 inc VAT)

Solder dross removing toolSolder dross removing tool
Solder dross removing tool

Don't throw good solder away! This handy tool separates good solder from spent dross waste and will save you money.

£98.75 ex VAT(£118.50 inc VAT)
Qualitek 381F Flux
Qualitek 381F Flux

A rosin based flux with excellent wetting properties giving excellent soldering results.

  • Ideal as a pre-dip for wire tinning
  • Solder seperately or with solder pot kits
  • Gives an excellent solder finish
  • 500ml£9.20
  • 1 litre£13.25
from £9.20 ex VAT(£11.04 inc VAT)

Qualitek 399-42 No Clean Flux 1 litre
Qualitek 399-42 No Clean Flux 1 litre

A low solids no clean flux for PCB Wave Soldering of PTH and SMT component Lead Free soldering.

£12.45 ex VAT(£14.94 inc VAT)
Fisnar SL101N digital dispenser
Fisnar SL101N digital dispenser

With 3 modes of operation and up to 9 dispensing programs. A Fisnar quality digital dispenser.

£465.00 ex VAT(£558.00 inc VAT)

Dispensing tool for Solder Pastes and AdhesivesDispensing tool for Solder Pastes and Adhesives
Dispensing tool for Solder Pastes and Adhesives

A low cost dispensing gun for 30cc syringes of solder pastes and adhesives.

£15.95 ex VAT(£19.14 inc VAT)
Kahnetics Stainless Steel Dispensing Needle 14 gauge
Kahnetics Stainless Steel Dispensing Needle 14 gauge

A 14 gauge syringe needle ideal for flux gels and adhesive dispensing.

£2.45 ex VAT(£2.94 inc VAT)

Kahnetics Stainless Steel Dispensing Needle 15 gauge
Kahnetics Stainless Steel Dispensing Needle 15 gauge

A 15 gauge syringe needle ideal for flux gels and adhesive dispensing.

£2.45 ex VAT(£2.94 inc VAT)
Kahnetics Stainless Steel Dispensing Needle 18 gauge
Kahnetics Stainless Steel Dispensing Needle 18 gauge

An 18 gauge syringe needle ideal for solder paste, flux gels and adhesive dispensing.

£2.25 ex VAT(£2.70 inc VAT)

Kahnetics Stainless Steel Dispensing Needle 20 gauge
Kahnetics Stainless Steel Dispensing Needle 20 gauge

A 20 gauge syringe needle ideal for solder paste, flux gels and adhesive dispensing.

£2.25 ex VAT(£2.70 inc VAT)
Kahnetics Stainless Steel Dispensing Needle 22 gauge
Kahnetics Stainless Steel Dispensing Needle 22 gauge

A 22 gauge syringe dispensing needle ideal for Type 3 solder paste.

£2.25 ex VAT(£2.70 inc VAT)

Kahnetics Stainless Steel Dispensing Needle 23 gauge
Kahnetics Stainless Steel Dispensing Needle 23 gauge

A 23 gauge syringe dispensing needle ideal for Type 3 solder paste.

£2.25 ex VAT(£2.70 inc VAT)
Kahnetics Stainless Steel Dispensing Needle 25 gauge
Kahnetics Stainless Steel Dispensing Needle 25 gauge

A 25 gauge syringe dispensing needle ideal for Type 4 solder paste.

£2.25 ex VAT(£2.70 inc VAT)

Tapered Plastic Dispensing Needle 14 gauge (Pack of 5)
Tapered Plastic Dispensing Needle 14 gauge (Pack of 5)

A 14 gauge tapered smooth flow syringe needle ideal for flux gels and adhesive dispensing.

£1.75 ex VAT(£2.10 inc VAT)
Tapered Plastic Dispensing Needle 16 gauge (Pack of 5)
Tapered Plastic Dispensing Needle 16 gauge (Pack of 5)

A 16 gauge tapered smooth flow syringe needle ideal for flux gels and adhesive dispensing.

£1.75 ex VAT(£2.10 inc VAT)

Tapered Plastic Dispensing Needle 18 gauge (Pack of 5)
Tapered Plastic Dispensing Needle 18 gauge (Pack of 5)

An 18 gauge tapered smooth flow syringe needle ideal for flux gels and adhesive dispensing.

£1.75 ex VAT(£2.10 inc VAT)
Tapered Plastic Dispensing Needle 20 gauge (Pack of 5)
Tapered Plastic Dispensing Needle 20 gauge (Pack of 5)

A 20 gauge tapered smooth flow syringe needle ideal for solder pastes, flux gels and adhesive dispensing.

£1.75 ex VAT(£2.10 inc VAT)

Tapered Plastic Dispensing Needle 22 gauge (Pack of 5)
Tapered Plastic Dispensing Needle 22 gauge (Pack of 5)

A 22 gauge tapered smooth flow syringe needle ideal for solder pastes, flux gels and adhesive dispensing.

£1.75 ex VAT(£2.10 inc VAT)
Tapered Plastic Dispensing Needle 25 gauge (Pack of 5)
Tapered Plastic Dispensing Needle 25 gauge (Pack of 5)

A 25 gauge tapered smooth flow syringe needle ideal for fine solder powder solder pastes.

£1.75 ex VAT(£2.10 inc VAT)

Yellow PCB Inspection Arrows pack of 5000Yellow PCB Inspection Arrows pack of 5000
Yellow PCB Inspection Arrows pack of 5000

A bright yellow marking arrows for printed circuit board and equipment marking. Supplied in packs of 5000 off

£41.15 ex VAT(£49.38 inc VAT)
Red PCB Inspection Arrows pack of 5000
Red PCB Inspection Arrows pack of 5000

A bright red marking arrows for printed circuit board and equipment marking. Supplied in packs of 5000 off

£41.15 ex VAT(£49.38 inc VAT)

White PCB Inspection Arrows pack of 5000
White PCB Inspection Arrows pack of 5000

A white marking arrow for printed circuit board and equipment marking. Supplied in packs of 5000 off

£41.15 ex VAT(£49.38 inc VAT)
PCB Inspection Arrows Chevron type
PCB Inspection Arrows Chevron type

Highlight points of interest on a circuit board. Bright orange and no adhesive left after removal.

£59.50 ex VAT(£71.40 inc VAT)

Large Marking Arrows
Large Marking Arrows

Large marking arrows for printed circuit board and equipment marking. 

£82.50 ex VAT(£99.00 inc VAT)
Pre-heat and Reflow Hot PlatePre-heat and Reflow Hot Plate
Pre-heat and Reflow Hot Plate

A pre-heat hot plate or mini reflow oven. Simply move the hinged hood for one or the other!

  • Dual purpose equipment 
  • Reflow small SMT PCB assemblies
  • Hot plate temperature from 50°C to 300°C
£339.90 ex VAT(£407.88 inc VAT)

Quick 854 Infrared Preheater
Quick 854 Infrared Preheater

Rapid heating infrared preheater from Quick Soldering Equipment. With a ceramic plate area of 130 x 130mm

£270.00 ex VAT(£324.00 inc VAT)
Quick 860DA SMD Rework Station
Sale
Quick 860DA SMD Rework Station

A hot air rework station with a light pencil style hand piece. 

  • Gentle air flow at 0.3-6.8 litres/min
  • 6 small nozzles supplied
  • Ideal for small component removal and delicate rework
Was £162.50 Now £148.00 ex VAT(£177.60 inc VAT)

Quick 861DA Hot air rework stationQuick 861DA Hot air rework station
Quick 861DA Hot air rework station

A hot air desoldering rework station for removing SMD and PTH components. 

  • Three angled nozzles supplied
  • Three programmable channels setting temperature and air flow
  • Another excellent product from Quick
£257.50 ex VAT(£309.00 inc VAT)
No Clean Desolder Braid 0.9mmNo Clean Desolder Braid 0.9mm
No Clean Desolder Braid 0.9mm

A no clean desolder braid, also known as solder wick, in a fine 0.9mm gauge and 1.5 metre length.

  • An Antistatic bobbin  
  • Colour coded White bobbin
  • Techspray braid removes up to 4 times more solder
£1.98 ex VAT(£2.38 inc VAT)

No Clean Desolder Braid 1.4mmNo Clean Desolder Braid 1.4mm
No Clean Desolder Braid 1.4mm

A no clean desolder braid, also known as solder wick, in a 1.4mm gauge and 1.5 metre length.

  • An Antistatic bobbin  
  • Colour coded Yellow bobbin
  • Techspray braid removes up to 4 times more solder
£2.25 ex VAT(£2.70 inc VAT)
No Clean Desolder Braid 1.9mmNo Clean Desolder Braid 1.9mm
No Clean Desolder Braid 1.9mm

A no clean desolder braid, also known as solder wick, in a 1.9mm gauge and 1.5 metre length.

  • An Antistatic bobbin  
  • Colour coded Green bobbin
  • Techspray braid removes up to 4 times more solder
£2.40 ex VAT(£2.88 inc VAT)

No Clean Desolder Braid 2.5mmNo Clean Desolder Braid 2.5mm
No Clean Desolder Braid 2.5mm

A no clean desolder braid, also known as solder wick, in a 2.5mm gauge and 1.5 metre length.

  • An Antistatic bobbin  
  • Colour coded Blue bobbin
  • Techspray braid removes up to 4 times more solder
£2.50 ex VAT(£3.00 inc VAT)
No Clean Desolder Braid 3.3mmNo Clean Desolder Braid 3.3mm
No Clean Desolder Braid 3.3mm

A no clean desolder braid, also known as solder wick, in a wide 3.3mm gauge and 1.5 metre length.

  • An Antistatic bobbin  
  • Colour coded Brown bobbin
  • Techspray braid removes up to 4 times more solder
£2.60 ex VAT(£3.12 inc VAT)

No Clean Desolder Braid 4.9mmNo Clean Desolder Braid 4.9mm
No Clean Desolder Braid 4.9mm

A no clean desolder braid, also known as solder wick, in a wide 4.9mm gauge and 1.5 metre length.

  • An Antistatic bobbin  
  • Colour coded Red bobbin
  • Techspray braid removes up to 4 times more solder
£2.70 ex VAT(£3.24 inc VAT)
No Clean Flux Rework PenNo Clean Flux Rework Pen
No Clean Flux Rework Pen

Make rework easier with a flux pen. Easy dispense flux on to the solder joint.

£4.60 ex VAT(£5.52 inc VAT)

RMA Flux Rework Pen
RMA Flux Rework Pen

A pen style dispenser for the easy application of an active rosin based flux for circuit board rework. 

£4.60 ex VAT(£5.52 inc VAT)
Water Soluble Flux Rework Pen
Water Soluble Flux Rework Pen

A pen style dispenser for the easy application of a water soluble flux for component and solder joint reworking. 

£4.60 ex VAT(£5.52 inc VAT)

Polyimide Kapton Dots 3mm
Polyimide Kapton Dots 3mm

1000 per roll polyimide dots for high temperature solder masking.

  • Protect fixture mounting holes and component pads from solder filling
  • Easy to remove and no residues left 
  • Supplied on convenient roll size
£8.05 ex VAT(£9.66 inc VAT)
Polyimide Kapton Dots 5mm
Polyimide Kapton Dots 5mm

1000 per roll 5mm polyimide dots for high temperature solder masking.

  • Protect fixture mounting holes and component pads from solder filling
  • Easy to remove and no residues left 
  • Supplied on convenient roll size
£8.62 ex VAT(£10.34 inc VAT)

Polyimide Kapton Dots 6mm
Polyimide Kapton Dots 6mm

1000 per roll 6mm polyimide dots for high temperature solder masking.

  • Protect fixture mounting holes and component pads from solder filling
  • Easy to remove and no residues left 
  • Supplied on convenient roll size
£9.68 ex VAT(£11.62 inc VAT)
Polyimide Kapton Dots 8mm
Polyimide Kapton Dots 8mm

1000 per roll 8mm polyimide dots for high temperature solder masking.

  • Protect fixture mounting holes and component pads from solder filling
  • Easy to remove and no residues left 
  • Supplied on convenient roll size
£10.76 ex VAT(£12.91 inc VAT)

Polyimide Kapton Dots 9mm
Polyimide Kapton Dots 9mm

1000 per roll 9mm polyimide dots for high temperature solder masking.

  • Protect fixture mounting holes and component pads from solder filling
  • Easy to remove and no residues left 
  • Supplied on convenient roll size
£11.38 ex VAT(£13.66 inc VAT)
Polyimide Kapton Dots 10mm
Polyimide Kapton Dots 10mm

1000 per roll 10mm diameter polyimide dots for high temperature solder masking.

  • Protect fixture mounting holes and component pads from solder filling
  • Easy to remove and no residues left 
  • Supplied on convenient roll size
£12.06 ex VAT(£14.47 inc VAT)

Polyimide Kapton Dots 12mm
Polyimide Kapton Dots 12mm

Large 12mm diameter polyimide dots for high temperature solder masking. 1000 on each roll.

  • Protect fixture mounting holes and component pads from solder filling
  • Easy to remove and no residues left 
  • Supplied on convenient roll size
£12.98 ex VAT(£15.58 inc VAT)
Polyimide Kapton Dots 15mm
Polyimide Kapton Dots 15mm

1000 per roll 15mm polyimide dots for high temperature solder masking.

  • Prevent component and fixing holes from solder fill
  • Large dots for larger area masking
  • No residue when removing
£21.45 ex VAT(£25.74 inc VAT)

Polyimide Kapton Dots 19mm
Polyimide Kapton Dots 19mm

1000 per roll 19mm polyimide dots for high temperature solder masking.

  • Prevent component and fixing holes from solder fill
  • Large dots for larger area masking
  • No residue when removing
£29.75 ex VAT(£35.70 inc VAT)
Polyimide Kapton Dots 25mm
Polyimide Kapton Dots 25mm

1000 per roll of the large 25mm polyimide dots for high temperature solder masking.

  • Prevent component and fixing holes from solder fill
  • Large dots for larger area masking
  • No residue when removing
£43.90 ex VAT(£52.68 inc VAT)
Page: | 1 | 2 | 3 |