Fluxes
  • display as grid Grid
  • display as list List

Qualitek IPA solution 1 litre
Qualitek IPA solution 1 litre

A high purity Isopropanol (IPA) solution for cleaning and thinning of a wide range of products. 

  • 99.9% IPA purity with 0.1% Deionised water
  • Due to high demand maximum of 6 litres per order
  • See Technical and Safety data sheets

  • SEE FREQUENTLY ASKED QUESTIONS BELOW FOR THIS PRODUCT
£12.80 ex VAT(£15.36 inc VAT)
Qualitek 381F Flux
Qualitek 381F Flux

A rosin based flux with excellent wetting properties giving excellent soldering results.

  • Ideal as a pre-dip for wire tinning
  • Purchase separately or with our solder pot kits
  • Gives an excellent solder finish
  • 500ml£9.55
  • 1 litre£13.60
from £9.55 ex VAT(£11.46 inc VAT)

737N Water Soluble Flux
737N Water Soluble Flux

A highly active water-soluble flux manufactured for the wave soldering process for SMT and PTH assemblies. Supplied in 1 litre bottles.

  • Effective soldering over a broad preheat range
  • Gives excellent wetting and PTH barrel filling
  • Suitable for both Lead-Free and Leaded soldering

 

£13.98 ex VAT(£16.78 inc VAT)
Qualitek 399-42 No Clean Flux 1 litre
Qualitek 399-42 No Clean Flux 1 litre

A low solids no clean flux for PCB Wave Soldering of PTH and SMT component Lead Free soldering.

£12.45 ex VAT(£14.94 inc VAT)

Qualitek 392-35F No Clean Flux 1 litre
Qualitek 392-35F No Clean Flux 1 litre

A low solids no clean flux for wave soldering of PTH and SMT printed circuit boards giving bright, shiny solder joints.

£12.45 ex VAT(£14.94 inc VAT)
Phosphoric Acid Flux for Stainless Steel Soldering
Phosphoric Acid Flux for Stainless Steel Soldering

Trying to solder stainless steel and having problems? Use the correct flux, Phosphoric Acid flux, and get excellent solder joints.

£33.95 ex VAT(£40.74 inc VAT)

Zinc Chloride Flux 500mlZinc Chloride Flux 500ml
Zinc Chloride Flux 500ml

A highly effective and active acid flux for promoting wetting on many metals.

  • Ideal for soldering Copper and Brass
  • Also good for Zinc and pre-tinned metals
  • Any flux residues easily cleaned
£18.35 ex VAT(£22.02 inc VAT)
Zinc Chloride Flux 1 litre
Zinc Chloride Flux 1 litre

A brush on or dip active acid flux for use on Copper, Brass, Zinc and pre-tinned metals.

  • Promotes excellent wetting
  • Easy clean flux residues
  • Available in 500ml and 1 litre bottles
£26.25 ex VAT(£31.50 inc VAT)