ESD Floor Testing Kit

ESD Floor Tester

 

ESD Floor Tester

MPN: ESD1183

Test ESD flooring quickly. Enables testing over a large floor area. Supplied in a conductive carry case.

UK mainland delivery from £11.95 (ex VAT)

Delivery Options

ESD Floor Testing Kit
(ESD1183)
£275.00
You may also need:
ESD Wrist Strap and Footwear Test Station
updown
ESD Wrist Strap and Footwear Test Station
£110.25 ex VAT
(£132.30 inc VAT)

Product Description

This ESD Floor testing kit is designed to perform two test situations. 1) A Dynamic Test - the operator, wearing previously confirmed tested and passed ESD Shoes or ESD Heelstraps, walks around the floor and 2) A Static Test - using the supplied 2.5 kg floor weight this will check the Earth bonding of the floor from the weight to the floor's Earth bonding point.

The ESD Floor Test Kit contains:
Auto switching floor test meter and a 9V battery
2.5kg floor weight
Two conductive foam pads (for uneven floor finishes)
A 5 metre shielded earth to floor test meter cable with Earth plug (no resistor)
A shielded floor test meter to weight cable

Hand held meter providing quick accurate floor testing

Meter, weights and leads supplied

Supplied in a strong conductive carry case 

Easy 
to read coloured LED range and audible buzzer

Calibration certificate supplied

 

Method of Testing

DYNAMIC TEST
Note: It is important that prior to the Floor Testing, the operator's footwear (ESD Shoes or ESD Heelstraps) are tested and passes using an ESD Footwear Tester.

Test method: 
a) Plug the Earth bonding plug into a wall socket.
b) Plug the 4mm jack connector of that cable in to the Floor test meter (at the bottom represented by the Earth symbol).  
c) Ensure the shielded weight to floor tester cable is not connected to the meter.
d) Press and hold the test button whilst walking on the floor (Do not wear gloves, finger cots or anything that may isolate the operator from the conductive button).

Results......
GREEN LED on - This indicates that the floor and operator are correctly grounded at the point the test is carried out.
RED LED on - This indicates that the Earthing of the floor or at that point is not sufficient to provide ESD protection.
YELLOW LED on - This shows the battery has enough charge to correctly test the Earth bonding.

STATIC TEST
Test method: 
a) Plug the Earth bonding plug into a wall socket.
b) Plug the 4mm jack connector of that cable in to the Floor test meter (at the bottom represented by the Earth symbol).  
c) Plug the shielded weight to meter cable into the Floor test meter (socket on the front opposite LEDs)
d) Place the weight on to the floor using the conductive foam pads if the floor is uneven.
e) Press and hold the test button.

Results......
GREEN LED on - This indicates that the floor and operator are correctly grounded at the point the test is carried out.
RED LED on - This indicates that the Earthing of the floor or at that point is not sufficient to provide ESD protection.
YELLOW LED on - This shows the battery has enough charge to correctly test the Earth bonding.

 

 

Specification

Calibration certificate supplied

Power supply: Battery operated PP3 9 volt
Test Voltage: Nominal 9 volts-stepped to 100 volts
Test Range: Pass (Green LED) < 1 x 10(10) ohms, Fail (Red LED) > 1 x 10(10) ohms
Relative Humidity: 0% - 90% (non-condensing)
Accuracy :- +/- 10%
Repeatability: +/- 10%

CE approved

You may also like


ESD Floor Cleaner
ESD Floor Cleaner
£37.45 ex VAT
(£44.94 inc VAT)

People who bought this also bought...


ESD Floor Cleaner
ESD Floor Cleaner
£37.45 ex VAT
(£44.94 inc VAT)