ESD Bench Matting with extra cushion layer full rolls

MPN: EBM-FULLRB
A 3mm thick ESD bench matting material that gives extra protection for delicate parts and added comfort for working.
- Great colour for your ESD bench
- Resistant to solder splashing and abrasion
Note: Currently not available for delivery to Europe Zone 3, Europe Zone 4, Europe Zone 5, Europe Zone 6, Guernsey, Jersey and Australia, Brazil, Canada, Hong Kong, Malaysia, Mexico, New Zealand & USA.
Delivery Options
Product Description
When preparing ESD bench matting for static control areas the need may arise where matting sizes are different than the standard 900 x 600mm and 1200 x 600mm lengths. Buying a full roll gives the opportunity to cut and stud to your own requirement. The Royal Blue ESD bench matting is available in the standard 600mm (2 ft) width (Custom cuts are also available so do contact us for a quotation).
3mm high quality smooth easy to clean finish
Matting is resistant to solder splashing and abrasion
Easy to cut and can be loose-laid or glued to the bench
10 metres total length
Specification
Matting Density: 1.4 +/- 0.02 g/cm3 (DIN 53479)
Matting Abrasion (5N load): 130mm3 (DIN 53516)
Matting Hardness: 78 Shore A (DIN 53505)
Matting Impression test: 0.1mm (DIN 51955)
Matting Light reflection: 19% - 29% (DIN 5036)
Matting usable temperature range: Maximum 60°C
Point to point resistance Rp Typical value: 10(7) ohms Test standard: EN61340-2-3
Resistance to groundable point Rg Typical value: 10(6) - 10(7) ohms
Test standard: EN61340-2-3