ESD Bench Matting Blue Full Rolls

Blue ESD bench matting in 10 metre full rolls

Click on image to enlarge

MPN: EBM-FULLB

ESD blue bench matting supplied on full rolls of 10 metres in length and available in 600mm and 1200mm widths.

Note: Currently not available for delivery to N.Scotland, N.Ireland, Scottish Isles, Isle of Wight, Isle of Man, Scilly Isles, Europe Zone 3, Europe Zone 4, Europe Zone 5, Europe Zone 6, Guernsey, Jersey and Australia, Brazil, Canada, Hong Kong, Malaysia, Mexico, New Zealand & USA.

Delivery Options

CUSTOMER SERVICE
ORDERING HELP

Description
Specification

Product Description

When preparing ESD bench matting for static control areas the need may arise where matting sizes are different than the standard 900 x 600mm and 1200 x 600mm lengths. Buying a full roll gives the opportunity to cut and stud to your own requirement. The Blue ESD bench matting is available in the standard 600mm and 1200mm roll widths.

2mm high quality smooth easy to clean finish

Matting is resistant to solder splashing and abrasion

Easy to cut and can be loose-laid or glued to bench

10 metres in length

View other products in ESD Bench Matting Full Rolls »

Specification

Matting Density: 1.4 +/- 0.02 g/cm3 (DIN 53479)
Matting Abrasion (5N load): 130mm3 (DIN 53516)
Matting Hardness: 78 Shore A (DIN 53505)
Matting Impression test: 0.1mm (DIN 51955)
Matting Light reflection: 19% - 29% (DIN 5036)
Matting usable temperature range: Maximum 60°C
Point to point resistance Rp Typical value: 10(7) ohms Test standard: EN61340-2-3
Resistance to groundable point Rg Typical value: 10(6) - 10(7) ohms
Test standard: EN61340-2-3