ESD Bench Matting Black Full Rolls

Full rolls of Black ESD bench matting available

Click on image to enlarge

MPN: EBM-FULLBL

Full rolls of 2mm thick ESD bench matting in black 2 layer material consisting of a dissipative top layer and conductive bottom.

Available in 3 different widths
10 metre lengths
Easy to cut and punch studs for grounding

Write the first review

Note: Currently not available for delivery to N.Scotland, N.Ireland, Scottish Isles, Isle of Wight, Isle of Man, Scilly Isles, Europe Zone 3, Europe Zone 4, Europe Zone 5, Europe Zone 6, Guernsey, Jersey and Australia, Brazil, Canada, Hong Kong, Malaysia, Mexico, New Zealand & USA.

Delivery Options

CUSTOMER SERVICE
ORDERING HELP

Description
Specification

Product Description

When preparing a static controlled production bench area one of the first considerations is the introduction of an ESD bench mat. Combined with an Earth grounding cord, Earth bonding plug and wrist strap and cord set you have the starting blocks to grounding static. New to our range is this ESD black bench matting in a 2mm thick material; dissipative black top layer and black conductive rubber bottom layer.

2mm high quality rugged synthetic rubber

Heat resistant to solder splashing

Slight textured surface finish

Can be loose-laid or glued to bench

View other products in ESD Bench Matting Full Rolls »

Specification

Matting Density: 1.4 +/- 1.02 g/cm3 (DIN 53479)
Matting Abrasion (5N load): 130mm3 (DIN 53516)
Matting Hardness: 80 Shore A (DIN 53505)
Matting Impression test: 0.1mm (DIN 51955)
Matting usable temperature range: Maximum 60°C
Surface resistance Rp Typical value: 10(6) - 10(9) ohms Test standard: EN61340-2-3
Conductive Layer Rp Typical value: 10(6) ohms Test standard: EN61340-2-3