Tin container for collection of solder dross

A large tin with lid and sealing latch

 

A large tin with lid and sealing latch

MPN: SB016

A suitable tin for collection and securing of spent solder dross during wave soldering.

UK mainland delivery from £4.95 (ex VAT)

Delivery Options

Note: Currently available for delivery to England, Wales, Central Scotland, East Scotland and N.Scotland, N.Ireland, Scottish Isles, Isle of Man, Scilly Isles, Channel Islands only.

£19.50 ex VAT
(£23.40 inc VAT)
You may also need:
Solder dross removing tool
updown
Solder dross removing tool
£84.50 ex VAT
(£101.40 inc VAT)

Tin container for collection of solder dross

up down

Product Description

During the wave soldering operation or tinning process using a solder pot, dross can accumulate. Solder dross is a combination of oxides produced while the solder bath is molten and flux residues. During the operation this dross is periodically skimmed off the surface and can be placed inside the solder dross tin for the safe containment of a hazardous product. During the removal of the dross layer some of the solder alloy from the bath will also be present in various quantities depending on the care of removing the dross. This makes the dross a by-product that can be given to a recycling company to extract the good metals from it for further use in the smelting process.

A tin size of 230mm high x 290mm diameter

Securing latch supplied

Strong handle

Dispose of hazardous waste securely




 

 

 

 

Safety Instructions

DO NOT MIX SPENT WAVE SOLDER DROSS WITH WASTE SOLDER PASTE

DO NOT OVERLOAD THE TIN. A MAXIMUM OF 20KGS IS RECOMMENDED

ENSURE THE LID CAN BE SECURELY FASTENED

KEEP TIN LEAD AND LEAD FREE SEPARATE