ESD Floor Paint Red

A bold red ESD Floor Paint

 

A bold red ESD Floor Paint

MPN: A40 Red

An easy to apply ESD floor paint for static controlled areas in a bold red finish. Supplied in 5 litre tins.

UK mainland delivery from £11.50 (ex VAT)

Delivery Options

Note: Currently available for delivery to England, Wales, Central Scotland, East Scotland, N.Scotland, N.Ireland, Scottish Isles, Isle of Man, Scilly Isles, Channel Islands and Iceland only.

pdfESD Floor Paint Application Instructions

Delivery: 4 - 5 days

£162.75 ex VAT
(£195.30 inc VAT)
You may also need:
ESD Heavy Duty Floor Marking Tape
updown
ESD Heavy Duty Floor Marking Tape
£32.50 ex VAT
(£39.00 inc VAT)

Surface Resistivity Meter Kit
updown
Surface Resistivity Meter Kit
£257.40 ex VAT
(£308.88 inc VAT)

ESD Floor Paint Red

up down

Product Description

The A40 Acrylic ESD Floor Paint is a single pack water based product that can be safely applied by personnel without specialist knowledge of flooring sytems. What is important though is the surface preparation of the existing floor so please do read our 'Application of A40 Acrylic ESD Floor Paint' pdf above. Available in a 5 litre tin with a coverage of approximately 10 m² per litre. (Two thin coats are recommended)

Single pack paint ready to apply

Red colour (RAL 3011)

Copper grounding strips also supplied

Supplied in a 5 litre tin 

Specification

Physical Properties:

Typical thickness: 40 microns per coat (2 thin coats recommended)
Drying@ 20°C: Touch Dry 2 Hours
                           Re-Coat at 8 Hours
                           Full Cure 3 Days
Pot Life: 12 months
VOC Content: 60.5g/ litre
Coverage: 10m2 / litre per coat (2 thin coats recommended)
Mix ratio: Ready Mixed
Thinner: Not recommended
Colour: Red (RAL 3011)
Pack size: 5 litres

Limitations:
Do not apply at temperatures below 10°C. Curing times dependant on temperature, humidity and ventilation.

Electrical properties:
Surface resistance: 10(5) - 10(8) ohms/sq
Resistance to Ground: 10(5) - 10(8) ohms
Conforms to IEC 61340-5-1 / 2
Chareg Decay: Conforms to MILB81705C


 



 

 

Safety Data Sheet CLP

Safety Data Sheet

You may also like


ESD Heavy Duty Floor Marking Tape
ESD Heavy Duty Floor Marking Tape
£32.50 ex VAT
(£39.00 inc VAT)
ESD Floor Paint Grey
ESD Floor Paint Grey
£148.00 ex VAT
(£177.60 inc VAT)

Copper Adhesive Tape 19mm
Copper Adhesive Tape 19mm
£21.50 ex VAT
(£25.80 inc VAT)